NX588 programmable

Standerd Servo with XBus Programmable 
 
[Torque]95.4 (6.6V) / 106.9 (7.4V) / 121.4 (8.4V) oz-in
            6.9 (6.6V) / 7.7 (7.4V) / 8.7 (8.4V) kg･cm
[Speed] 0.21 (6.6V) / 0.19 (7.4V) / 0.17 (8.4V) Sec/60°
[Dimensions] 1.48 x 0.75 x 1.52 in / 37.5 x 19 x 38.5 mm
[Weight] 1.48 oz / 43 g
[Voltage Range] 6.0V-8.5V
Slow start function
Ultem Gear
With Ball Bearing (Single)
 
*Wide Voltage
* Single ball bearings
* Slow start function
* Compatible with any radio using PWM control
* XBus compatible allowing *120 to 180 deg travel
* featureYou can adjust Dumping,Hold,Deadband…etc
* Do not use this servo under the different voltage other than specified
* If used on a large and Heavy control surface
*Try to adjust Dumping.Hold .Dead band.Boost etc… You will set it up perfect condition.(use RX Xbus port    and Xbus TX)